Close

Morey MXC-1M1 GPS Tracker Vehicle OBD-II Port

1503192

New

Connectivity : 4G LTE Cat.M1, Bluetooth

More details

$119.00

Add to wishlist

Download

MCX-1M1 Datasheet

Morey MCX-1M1 GPS Tracker Datasheet

Download (885.19k)

More info

Package contents

The MCX1M1 device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:

  • MCX1M1 device;
  • Top and bottom device cover parts;
  • OBD II power supply adapter.

Basic characteristics

GSM / GPRS / GNSS features:

  • Quectel BG96 (LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B28 LTE TDD: B39 (for CAT M1 only)), TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
  • GPRS Multi-Slot class 12 (Up to 240 kbps);
  • SMS (text, data);
  • Integrated GNSS receiver;
  • Up to -165 dBm GNSS receiver sensitivity.


Hardware features:

  • Built-in movement sensor;
  • Built-in Bluetooth 3.0;
  • Built-in Bluetooth 4.0;
  • Internal High Gain GNSS antenna;
  • Internal High Gain GSM antenna;
  • Internal 128 MB Flash (422 400 Records);
  • 170 mAh Li-ion rechargeable 3.7 V battery.


Interface features:

  • Power supply: +10...+30 V;
  • 1 digital input;
  • CAN;
  • K-LINE;
  • USB port;
  • OBD II;
  • 2 LEDs indicating device status.

Special features:

  • Fast position fix;
  • High Quality track even in high density urban canyon;
  • Small case;
  • 2 LED status indication;
  • Real time tracking;
  • Smart data acquisition based on:
    • Time;
    • Speed;
    • Angle;
    • Distance;
    • Ignition or any other I/O event;
  • Sending acquired data via GPRS;
  • GPRS and SMS I/O events;
  • Virtual odometer;
  • Jamming detection;
  • Configurable using Secured SMS Commands.
  • Overvoltage protection.

Technical features

Part NamePhysical Specification
Navigation indicationLED
Modem indicationLED
OBD-IIStandard OBD-II connector
USBMini USB socket

Technical Details
2 W max.
Current consumption at 12 V
GPRS: max 50 mA rms
Nominal: average 35 mA rms
GPS sleep: average 12 mA
Deep Sleep: average 4.5 mA
Battery charge currentAverage 140 mA
Rated 250 mA
Operating temperature (without battery)-40..+85 °C
Storage temperature (without battery)-40..+85 °C
Storage relative humidity5..95% (no condensation)
Internal fuse3 A, 125 V
Device + case + battery weight70 g


Dimension drawing:

MCX-1M1

Technical information about internal battery

Internal Back-Up BatteryBattery Voltage (V)Nominal Capacity (MAh)Power (Wh)Charge Temperature (°C)Discharge Temperature (°C)Storage Temperature (°C)
Li-ion rechargeable battery3.75~3.901700.64 – 0.660 to +45-20 to +60-20 to +45 for 1 month
-20 to +35 for 6 months

Batteries are covered by 6 month warranty support.

gCAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
nBattery should not be disposed of into general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets.

Electrical characteristics

Characteristic DescriptionValue
Min.Typ.Max.Unit
Supply Voltage:
Supply Voltage
(Recommended Operating Conditions)
+10+30V
Digital Input:
Input resistance (DIN1)15
Input voltage
(Recommended Operating Conditions)
0Supply voltageV
Input Voltage threshold (DIN1)5V

Absolute maximum ratings

Characteristic DescriptionValue
Min.Typ.Max.Unit
Supply Voltage
(Absolute Maximum Ratings)
-16+16V
Digital Input Voltage
(Absolute Maximum Ratings)

Reviews

No customer reviews for the moment.

Write a review

Morey MXC-1M1 GPS Tracker Vehicle OBD-II Port

Morey MXC-1M1 GPS Tracker Vehicle OBD-II Port

Connectivity : 4G LTE Cat.M1, Bluetooth

4 other products in the same category

Close