Close

Morey MXC-2M1 Advanced GPS Tracker

1503209

New

Connectivity : 4G LTE Cat.M1, Bluetooth

More details

$113.50

Add to wishlist

Download

MCX-2M1 Datasheet

Morey MCX-2M1 GPS Tracker Datasheet

Download (1.07M)

More info

 

Package contents

The MCX2M1 device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:

  • MCX2M1 device;
  • Input and output power supply cable with 2x6 connection pins;
  • Micro USB cable;
  • 3.7 V 170 mAh rechargeable Li-ion battery;
  • GNSS antenna.

Basic characteristics

GSM / GPRS / GNSS features:

  • Quectel BG96 (LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B28 LTE TDD: B39 (for CAT M1 only)), TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
  • GPRS Multi-Slot class 12 (Up to 240 kbps);
  • SMS (text, data);
  • Integrated GNSS receiver;
  • Up to -165 dBm GNSS receiver sensitivity.


Hardware features:

  • Built-in movement sensor;
  • Built-in Bluetooth 4.0 LE;
  • External High Gain GNSS antenna;
  • Internal High Gain GSM antenna;
  • Internal flash memory 128MB (422 400 Records);
  • 170 mAh Li-ion rechargeable 3.7 V battery.


Interface features:

  • Power supply: +10...+30 V;
  • 3 digital inputs;
  • 1 negative inputs (DIN2);
  • 2 impulse inputs (DIN1, DIN2);
  • 2 analog input;
  • 3 digital outputs (connecting external relays, LED, buzzers etc);
  • 1-Wire temperature sensor;
  • 1-Wire iButton;
  • LVCAN RX (INPUT 5);
  • LVCAN TX (INPUT 6);
  • 2 LEDs indicating device status.


Special features:

  • Fast position fix;
  • High Quality track even in high density urban canyon;
  • Ultra small case;
  • Ready for harsh environment;
  • Easy to mount in limited access areas;
  • Firmly fasten;
  • 2 LED status indication;
  • Real time tracking;
  • Smart data acquisition based on:
    • Time;
    • Speed;
    • Angle;
    • Distance;
    • Ignition or any other I/O event;
  • Sending acquired data via GPRS;
  • GPRS and SMS I/O events;
  • Virtual odometer;
  • Jamming detection;
  • Configurable using Secured SMS Commands;
  • 1x micro SIM card; 1x eSIM;
  • Overvoltage protection;

DescriptionVoltageDuration
Normal operation

+10 ... +30 V

Unlimited

Protection turns on, device turns off34 VUnlimited
Maximum voltage< 70 VUnlimited
Maximum voltage impulse90 V5 ms

Technical features

Part NamePhysical Specification
Navigation indicationLED
Modem indicationLED
SocketSoldered inner socket
USBMicro USB socket
GNSSExternal GNSS antenna
GSMInternal GSM antenna

Technical Details
2 W max.
Current consumption at 12 V (Power supply 6...30 V DC)
GPRS: average 64.59 mA rms
Nominal: average 37.77 rms
GNSS sleep: average 11.1 mA
Deep Sleep: average 6.2 mA
Online Deep Sleep: average 6.5 mA
Battery charge currentAverage 140 mA
Operating temperature (without battery)-40..+85 °C
Storage temperature (without battery)-40..+85 °C
Storage relative humidity5..95% (no condensation)
Device + case + battery weight52 g


Dimension drawing:

MCX-2M1

Technical information about internal battery

Internal Back-Up BatteryBattery Voltage (V)Nominal Capacity (MAh)Power (Wh)Charge Temperature (°C)Discharge Temperature (°C)Storage Temperature (°C)
Li-ion rechargeable battery3.75~3.901700.64 – 0.660 to +45-20 to +60-20 to +45 for 1 month
-20 to +35 for 6 months

Batteries are covered by 6 month warranty support.

gCAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
nBattery should not be disposed of into general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets.

Electrical characteristics

Characteristic DescriptionValue
Min.Typ.Max.Unit
Supply Voltage:
Supply Voltage
(Recommended Operating Conditions)
+10+30V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)120µA
Drain current
(Digital Output ON, Recommended Operating Conditions)
0.10.5A
Static Drain-Source resistance
(Digital Output ON)
400600
Digital Input:
Input resistance (DIN1)47
Input voltage
(Recommended Operating Conditions)
0Supply voltageV
Input Voltage threshold (DIN1)7.5V
Analog Input:
Input voltage
(Recommended Operating Conditions), Range 1
0+10V
Input resistance, Range 1150
Measurement error on 12V, Range 13%
Additional error on 12 V, Range 1360mV
Measurement error on 30 V, Range 13%
Additional error on 30 V, Range 1900mV
Input Voltage
(Recommended Operating Conditions), Range 2
0+30V
Input resistance, Range 2150
Measurement error on 12V, Range 23%
Additional error on 12 V, Range 2360mV
Measurement error on 30 V, Range 23%
Additional error on 30 V, Range 2900mV
Output Supply Voltage 1-Wire:
Supply voltage+4.5+4.7V
Output inner resistance7Ω
Output current (Uout > 3.0 V)30mA
Short circuit current (Uout = 0)75mA

s
Analog Input error margin can increase if temperature varies.

Absolute maximum ratings

Characteristic DescriptionValue
Min.Typ.Max.Unit
Supply Voltage
(Absolute Maximum Ratings)
-32+32V
Drain-Source clamp threshold voltage
(Absolute Maximum Ratings), (Idrain = 2 mA)
+36V
Digital Input Voltage
(Absolute Maximum Ratings)
-32+32V
Analog Input Voltage
(Absolute Maximum Ratings)
-32+32V

Reviews

No customer reviews for the moment.

Write a review

Morey MXC-2M1 Advanced GPS Tracker

Morey MXC-2M1 Advanced GPS Tracker

Connectivity : 4G LTE Cat.M1, Bluetooth

4 other products in the same category

Close