Close

Morey MXC-3M1 Professional GPS Tracker

New

Connectivity : 4G LTE Cat.M1, Bluetooth

More details

Pre-order now for delivery in 2-3 weeks

$263.50

Add to wishlist

More info

Package contents

Usually the MCX3M1 device sample is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:

  • MCX3M1 device;
  • 4 screws for assembling device
  • GPS/GLONASS antenna
  • GSM antenna
  • USB cable
  • Port 1/2 cable
  • Port 3 cable
  • Ni-MH Rechargeable battery, 8.4V, 550 mA.
  • Input and output power supply cable with 2x10 connection pins.

Basic characteristics

GSM/GPRS/4G LTE CAT.M1 features:

  • FDD-LTE:
    • B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/B19/ B20/ B26/ B28
  • TDD-LTE:
    • B39 (for Cat.M1 only)
  • GSM/GPRS bands:
    • 850/900/1800/1900MHz
    • GPRS and EDGE class 12
    • SMS (text, data)

GNSS features:

  • Tracking: 33/ 99 acquisition channels
  • -165 dBM sensitivity
  • Hot start <1s
  • Warm Start < 25s
  • Cold start < 35s
  • NMEA-183 protocol
  • GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
  • Accuracy < 3m

Hardware features:

  • STM32 processor;
  • 2 MB internal Flash memory;
  • External memory card slot;
  • Built-in accelerometer;
  • Built-in Blue-tooth 5.0;
  • Internal backup battery included;

Interface:

  • Integrated KLINE
  • Dual CAN J1939
  • J1708 CAN
  • RS485 and 2x RS232 support
  • 4 Digital Inputs for object status monitoring
  • 4 Digital Open-collector Outputs (controlling external relays, LED, buzzers, etc.)
  • 4 Analog Inputs
  • 1-wire interface
  • Ni-Mh 550 mAh internal battery
  • MicroSD card
  • 2 status LED
  • Dimensions: L(104,1mm)xW(76,8mm)xH(31,5mm)
  • Configuration and firmware update (via FOTA and USB cable)
  • External GSM antenna for higher sensitivity
  • External GNSS antenna for higher sensitivity

Special features:

  • Fast position fix;
  • High Quality track even in high density urban canyon;
  • Ultra small case;
  • Ready for harsh environment;
  • Easy to mount in limited access areas;
  • Firmly fasten;
  • 2 LED status indication;
  • Real time tracking;
  • Smart data acquisition based on:
  • Time;
  • Speed;
  • Angle;
  • Distance;
  • Ignition or any other I/O event;
  • Sending acquired data via GPRS;
  • GPRS and SMS I/O events;
  • Virtual odometer;
  • Jamming detection;
  • Configurable using Secured SMS Commands;
  • 1x micro SIM card; 1x eSIM;
  • Overvoltage protection;

DescriptionVoltageDuration
Normal operation

+10 ... +30 V

Unlimited

Protection turns on, device turns off34 VUnlimited
Maximum voltage< 70 VUnlimited
Maximum voltage impulse90 V5 ms

Technical features

Part NamePhysical Specification
Navigation indicationLED
Modem indicationLED
SocketSoldered inner socket
USBMini USB socket
GNSSExternal GNSS antenna
GSMExternal GSM antenna

Technical Details
2 W max.
Current consumption at 12 V
GPRS: average 75 mA rms
Nominal: average 46 rms
GNSS sleep: average 35 mA
Deep Sleep: average 11 mA
Online Deep Sleep: average 12 mA
Battery charge currentAverage 55 mA
Operating temperature (without battery)-40..+85
Storage temperature (without battery)-40..+85
Storage relative humidity5..95% (no condensation)
Device + case + battery weight200 g

Technical information about internal battery

Internal Back-Up BatteryBattery Voltage (V)Nominal Capacity (MAh)Charging Temperature (°C)
Ni-MH rechargeable battery8.4~10.05500 – 40

Batteries are covered by 6 month warranty support.

dCAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
fBattery should not be disposed of into general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets.

Electrical characteristics

Characteristic DescriptionValue
Min.Typ.Max.Unit
Supply Voltage:
Supply Voltage
(Recommended Operating Conditions)
+10+30V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)120µA
Drain current
(Digital Output ON, Recommended Operating Conditions)
0.5A
Static Drain-Source resistance
(Digital Output ON)
400300
Digital Input:
Input resistance (DIN1)15
Input resistance (DIN2)15
Input resistance (DIN3)15
Input voltage
(Recommended Operating Conditions)
0Supply voltageV
Input Voltage threshold (DIN1)7.5V
Input Voltage threshold (DIN2, DIN3, DIN4)2.5V
Analog Input:
Input voltage
(Recommended Operating Conditions), Range 1
0+10V
Input resistance, Range 1120
Input voltage
(Recommended Operating Conditions), Range 2
0+30V
Input resistance, Range 2147
Output Supply Voltage 1-Wire:
Supply voltage+3.3+3.9V
Output inner resistance7Ω
Output current (Uout > 3.0 V)30mA
Short circuit current (Uout = 0)75mA
CAN Interface:
Internal terminal resistors CAN bus120Ω
Differential input resistance193052
Recessive output voltage22.53V
Differential input resistance0.50.70.9V
Common mode input voltage-3030V
Power supply current (Hardware version with internal battery):
Deep Sleep, average, Icc.ds2.54mA
Sleep, average, Icc.ds, Vcc=10V45mA
Sleep, average, Icc.ds, Vcc=30V25mA
Ucc=12.6V, all modules fully working, internal battery is charging, Icc1350mA
Ucc=12.6V, all modules fully working, internal battery is charging, Icc2300mA
Ucc=25.2V, all modules fully working, internal battery is charging, Icc3195mA
Ucc=25.2V, all modules fully working, internal battery is charging, Icc4140mA

g
Analog Input error margin can increase if temperature varies.

Absolute maximum ratings

Characteristic DescriptionValue
Min.Typ.Max.Unit
Supply Voltage
(Absolute Maximum Ratings)
-32+32V
Drain-Source clamp threshold voltage
(Absolute Maximum Ratings), (Idrain = 2 mA)
+36V
Digital Input Voltage
(Absolute Maximum Ratings)
-32+32V
Analog Input Voltage
(Absolute Maximum Ratings)
-32+32V

Reviews

No customer reviews for the moment.

Write a review

Morey MXC-3M1 Professional GPS Tracker

Morey MXC-3M1 Professional GPS Tracker

Connectivity : 4G LTE Cat.M1, Bluetooth

4 other products in the same category

Close