NavigateWorx NR310-4G Cellular Router

CELLULAR
Frequency Bands LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28/B28A
LTE TDD: B40
WCDMA: B1/B2/B5/B8
GSM: B2/B3/B5/B8
SIM: 2 x SIM slots 1.8V / 3V
SIM Failover: Auto-switch cases: weak signal data limited SMS limited no network network denied data connection fail
Auto APN List: Operator APN list
Mobile Quota Control: Set up customized data limits for both SIM cards
Number of Antennas: 2 (MAIN + AUX)
Connector: SMA female

ETHERNET
Number of Ports: 1 x LAN
Port Type: Auto 10/100 Mbps auto MDI/MDIX
Magnet Isolation Protection: 1.5 KV

Wi-Fi
Wireless Mode: IEEE 802.1b/g/n Access Point (AP) and Client
Wireless Speed: 150 Mbps
Wireless Security: WPA WPA2 WEP CCMP TKIP
Frequency Bands: 2.412 – 2.484 GHz (2.4 GHz ISM band)
Antennas: 1 x RP-SMA for Wi-Fi antenna connector

SERIAL
Number of Ports: 1 x RS-232 (3 PIN) + 1 x RS-485
Connector: Terminal block
ESD Protection: ± 15 KV
Band Rate: 300bps to 115200bps

NETWORK
Routing: Static routing
Dynamic Routing (Optional): RIPv1/v2 OSPF BGP
Network Protocols: TCP UDP IPv4 ICMP NTP DNS HTTP HTTPS ARP PPP PPPoE DHCP
Connection Manager: Ping Detection Timer Reboot ICMP for link detection
DHCP: Static and dynamic IP allocation
DDNS: Supported some service providers others can be configured manually
Firewall: Flexible access control of TCP UDP ICMP packets MAC address filter
SMS: SMS Configuration SMS Gateway SMS Notification

VPN
OpenVPN: OpenVPN client supports up to 5 x OpenVPN tunnels
GRE: layer2 and layer3 supports up to 5 x GRE VPN tunnels
IPsec (Optional): IKEv1 IKEv2 supports up to 5 x IPsec VPN tunnels
DMVPN (Optional): Dynamic Multipoint Virtual Private Networking DMVPN
P PTP/L2TP (Optional): PPTP or Point to Point Tunneling Protocol and L2TP or layer 2 Tunneling Protocol (L2TP)

MONITORING & MANAGEMENT
Web GUI: HTTP/HTTPS firmware upgrade
Command Line Interface: SSHv2 and TELNET
Management platform: Central Management Platform

POWER
Connector: 7-pin 3.5 mm female socket
Input Voltage Range: 9 to 36 VDC
Power Consumption: Idle: 100 mA@12 V
Data link: 400 mA (peak) @12 V

HARDWARE SPECIFICATION
Watchdog: Built-in watchdog
LEDs: SYS NET USR RSSI x 3
Reset Button: Reset/restore to factory default button
Ingress Protection: IP30
Housing & Weight: Aluminum 200 g
Dimensions: 103.3mm x 82.8mm x 28.8mm
Installations: DIN-rail mounting
Operating Temperature: -40 °C to 75 °C
Operating Humidity: 5% to 95% non-condensing

APPROVAL
EMI: EN 55032:2012 Class B
EMS:
IEC 61000-4-2 ESD: Level 4
IEC 61000-4-3 RS: Level 3
IEC 61000-4-4 EFT: Level 3
IEC 61000-4-5 Surge: Level 3
IEC 61000-4-6 CS: Level 3
IEC 61000-4-12: Level 3

Vibration: EN50155

What's Included