HWgroup Water Leak Detection Sensing Cable A
For more info refer to the “order model specs” tab below
WLD sensing cable type A is a sensor for the detection of the presence of any conductive liquid. The liquid is detected along the entire length of the WLD sensing cable, which means that the extended area is monitored at once. The cable can be routed under the floors in data centers or along the walls or wrapped around the pipes. Even the smallest volume of conductive liquid (water, ethylene glycol...) can trigger the alarm. The sensing cable is the essential component of the WLD system, the cable needs a WLD device or WLD relay to work properly.
WLD sensing cable is manufactured in lengths of
- WLD sensing cable A - 2m
- WLD sensing cable A - 10m
- WLD sensing cable A - 50m
Custom length is available on request.
Sensing cable is part of HWg monitoring ecosystem (sensors + devices + SensDesk Technology portal), that gets you long-term reliable alerts, graphs, PDF reports, open API, remote device management, etc. The right Water Detection and early alert are essential in a lot of businesses, for example, data centers, etc. Water Leak Detection System from HW group is a complex solution developed to protect your facility against costly water damage that might threaten you.
>> Read the article about Water Leak Detection (WLD) System.
WLD sensing cable features

Additional information
| Weight | N/A |
|---|---|
| Order Model | WLD-Sensing cable A 2+2m, WLD-Sensing cable A 2+10m, WLD-Sensing cable A 2+50m, WLD-Sensing cable A 2m, WLD-Sensing cable A 10m, WLD-Sensing cable A 50m |
Specifications
Order model specs
Order model specs:
- 2-cable package 2+2: (WLD sensing cable A – 2m) + (WLD connecting cable AB, 2 m) = total length 4 m. Can be connected to any WLD zone input (green terminal block) on the device.
- 2-cable package 2+10m: (WLD sensing cable A – 10m) + (WLD connecting cable AB, 2 m) = total length 12 m. Can be connected to any WLD zone input (green terminal block) on the device.
- 2-cable package 2+50m: (WLD sensing cable A – 50m) + (WLD connecting cable AB, 2 m) = total length 52 m. Can be connected to any WLD zone input (green terminal block) on the device.
- WLD sensing cable 2m (Water Leak Detection – Type A) – Can be used to extension of WLD sensing cable within one zone. No connection cable included.
- WLD sensing cable 10m (Water Leak Detection – Type A) – Can be used to extension of WLD sensing cable within one zone. No connection cable included.
- WLD sensing cable 50m (Water Leak Detection – Type A) – Can be used to extension of WLD sensing cable within one zone. No connection cable included.







